Bookmark and Share
Data Storage Systems, Inc. offers the full line of QLogic fibre channel solutions including the QLogic QSB2342 FC Host Bus Adatper (HBA) . Along with all the QLogic fibre channel products, DSS, Inc. offers implementation/integration services if needed. For further information and assistance, please call our sales department at (763) 416-0474.

Designed as the optimum choice for Sun Microsystems servers implementing SBus, the QLogic SANblade QSB2342 host bus adapter (HBAs) offer 2-Gbps Fibre Channel combined with 64-bit, 25-MHz SBus. This union provides the performance and interoperability needed for highly scalable storage area networks (SANs). These multimode optic HBAs are specifically targeted for SUN enterprise servers in direct attach storage (DAS) as well as SAN environments.
QSB2342-CK
Ships in an individually packed box with a standard size bracket, a spare low-profile bracket, SANsurfer FC HBAs CD, and Quick Start Guide.
Ease of Use
Auto-negotiation of Fibre Channel speed bit rate (1 Gbps or 2 Gbps)
Easy detection of activities through an LED panel:
Power
Online
Signal acquired
Loss of synchronization
Firmware error
Automatic topology detection
Quick start guide
Persistent binding

Superior Scalability
Concurrent support for SCSI and IP protocols
Load balancing for optimized performance
Simultaneous initiator and target mode support
Local and remote management

Enhanced Reliability
Unique, single-integrated Fibre Channel controller for added reliability and optimum performanceocal and remote management
Cost Effective
The QSB2342 is the right solution for the added boost in performance if you require a dual port, 2-Gbps SBus HBA.

Leading Single Chip Integration
The QSB2342 uniquely integrates a RISC processor, a Fibre protocol engine, and transceivers into a single, efficient FC controller chip that increases reliability and performance by lowering CPU utilization.

Broad OEM Acceptance
The QSB2342 HBA is validated by every major OEM including EMC and Sun. The QSB2340’s extensive certification from major server and storage manufacturers makes it the perfect choice for multiplatform requirements.

Simplified Setup
Point-and-click installation and configuration wizards simply the HBA setup process. Storage administrators can quickly deploy HBAs across a SAN using standard HBA management tools and device utilities. The QSB2342 is also fully compatible with industry standard application programming interfaces (APIs), including SNIA HBA API and SMI-S, thereby allowing administrators to manage QLogic HBAs using third-party software applications.


Proven Architecture
The QSB2342 architecture is the result of more than 15 years of progressive development and testing. Proven architecture from QLogic delivers higher overall reliability and enables advanced functionality with its single-chip integration, placing QLogic years ahead of its competitors. The QSB2340 also has proven interoperability with all major software applications, hardware platforms, and operating systems.


The Bottom Line
Driving the standard for interoperability with extensive FC testing in SAN environments, you can feel confident in choosing the QLogic solution.
Speed
64-bit, 25-MHz SBus

Single voltage
5.0 V bus supported

Compliance
SBus Specification, IEEE std 1496-1993

Fibre Channel Specifications
Speed
200 MBps maximum at half-duplex
400 MBps maximum at full-duplex

Topology
FC-AL, FC-AL-2, point to point, switched fabric (FL_Port and F_Port)

Buffer credits
For 512-byte frame size, 9 credits issued
For 2K-byte frame size, 3 credits issued

Class of service
Class 3 Fibre Channel service

Protocols
SCSI-FCP, IP, FC-TAPE

Compliance
Second Generation FC Generic Services Definition (FC-GS-2), Third Generation FC Generic Services Definition (FC-GS-3), Fibre Channel-Physical and Signaling Interface (FC-PH), SCSI-3 Fibre Channel Protocol (SCSI-FCP), Fibre Channel-Arbitrated Loop-2 (FC-AL-2), Fibre Channel-Private Loop Direct Attach Technical Report (FC-PLDA), RFC 2625 IP and APR Over Fibre Channel, Fibre Channel Framing and Signaling (FC-FS)

Tools and Utilities
Management tools

FC HBA Manager

Device utilities
Command line interface; configuration utilities resident with BIOS and FCode

Boot support
Solaris SPARC: FCode

APIs
SNIA HBA API V2, SMI-S, and FDMI

Operating systems*
Solaris SPARC
$2,075.00
QSB 2342
© Copyright 2004–2012, Data Storage Systems, Inc.
Dual Port, 2 Gbps, 64 bit, 25 Mhz SBus FC HBA
Physical Specifications
Ports
Two

Media
Multimode Optic

Optics
Short wave laser

Connections
LC-style duplex connector that supports non-OFC, multimode fibre optic cabling using a 2 × 5 fibre optic transceiver module.

Form factor
SBus: 14.7cm × 8.4cm (5.8" × 3.3")

Bracket size
Standard size
Environment and Equipment Specifications
Airflow
0 lf/m

Temperature
Operating: 0°C/32°F to 55°C/131°F.
Storage: –20°C/–4°F to 70°C/158°F

Humidity
Relative (non-condensing): 10% to 90%
Storage: 5% to 95%

Power dissipation
~ 9.0 watts

Cable
50/125µm multimode fiber, 62.5/125 µm multimode fiber

Cable distances
1 Gbps: 500 meters 50/125 µm fiber, 300 meters 62.5/125 µm fiber
2 Gbps: 300 meters 50/125 µm fiber, 150 meters 62.5/125 µm fiber

Agency Approvals—EMI and EMC
US
FCC Part 15, Class B

Canada
Industry Canada ICES-003, Class B

Europe
89/336/EEC EMC Directive CE Mark: EN55022: 1995 CISPR 22: 1997 Class B, EN55024: 1998, EN61000-3-2:1995, EN61000-3-3:1995

Japan
VCCI, Class B

New Zealand/Australia
AS/NZS 3548 Class B
Data Protection,
Storage Networking Systems.