|
|
Data Storage Systems, Inc. offers the full line of QLogic fibre
channel solutions including the QLogic QLA2310FL FC Host Bus
Adatper (HBA) . Along with all the QLogic fibre channel products,
DSS, Inc. offers implementation/integration services if needed. For
further information and assistance, please call our sales
department at (763) 416-0474.
Designed and deployed by major server and storage OEMs, the QLogic SANblade QLA2310FL host bus adapters (HBAs) offer the high performance of 2-Gbps Fibre Channel combined with 64-bit, 66-MHz PCI-X. These multimode optic HBAs are targeted for servers in direct attach storage (DAS) as well as storage area network (SAN) environments
Designed and deployed by major server and storage OEMs, the QLogic SANblade QLA2310FL host bus adapters (HBAs) offer the high performance of 2-Gbps Fibre Channel combined with 64-bit, 66-MHz PCI-X. These multimode optic HBAs are targeted for servers in direct attach storage (DAS) as well as storage area network (SAN) environments
QLA2310FL-CK
Ships in an individually packed box with a standard
size bracket, a spare low-profile bracket, SANsurfer
FC HBAs CD, and Quick Start Guide.
Ease of Use
Auto-negotiation of Fibre Channel speed bit rate (1 Gbps or 2 Gbps)
Easy detection of activities through an LED panel:
Power
Online
Signal acquired
Loss of synchronization
Firmware error
Automatic topology detection
Quick start guide
Persistent binding
Superior Scalability
Concurrent support for SCSI and IP protocols
Load balancing for optimized performance
Simultaneous initiator and target mode support
Local and remote management
Enhanced Reliability
Unique, single-integrated Fibre Channel controller for added reliability and optimum performanceocal and remote management
Auto-negotiation of Fibre Channel speed bit rate (1 Gbps or 2 Gbps)
Easy detection of activities through an LED panel:
Power
Online
Signal acquired
Loss of synchronization
Firmware error
Automatic topology detection
Quick start guide
Persistent binding
Superior Scalability
Concurrent support for SCSI and IP protocols
Load balancing for optimized performance
Simultaneous initiator and target mode support
Local and remote management
Enhanced Reliability
Unique, single-integrated Fibre Channel controller for added reliability and optimum performanceocal and remote management
Cost Effective
If you are looking for low-profile boards for 1U and 2U servers, the QLA2310FL is a low-profile MD2 compliant version of the QLogic QLA2310F, is the perfect fit.
Leading Single Chip Integration
The QLA2310FL uniquely integrates a RISC processor, a Fibre protocol engine, and transceivers into a single, efficient FC controller chip that increases reliability and performance by lowering CPU utilization.
Broad OEM Acceptance
The QLA2310FL HBA is validated by every major OEM including Dell, EMC, HDS, HP, IBM, and Sun. The QLA2310’s extensive certification from major server and storage manufacturers makes it the perfect choice for multiplatform requirements.
Simplified Setup
Point-and-click installation and configuration wizards simply the HBA setup process. Storage administrators can quickly deploy HBAs across a SAN using standard HBA management tools and device utilities. The QLA2310FL is also fully compatible with industry standard application programming interfaces (APIs), including SNIA HBA API and SMI-S, thereby allowing administrators to manage QLogic HBAs using third-party software applications.
Proven Architecture
The QLA2310FL architecture is the result of more than 15 years of progressive development and testing. Proven architecture from QLogic delivers higher overall reliability and enables advanced functionality with its single-chip integration, placing QLogic years ahead of its competitors. The QLA2310FL also has proven interoperability with all major software applications, hardware platforms, and operating systems.
The Bottom Line
Driving the standard for interoperability with extensive FC testing in SAN environments, you can feel confident in choosing the QLogic solution.
If you are looking for low-profile boards for 1U and 2U servers, the QLA2310FL is a low-profile MD2 compliant version of the QLogic QLA2310F, is the perfect fit.
Leading Single Chip Integration
The QLA2310FL uniquely integrates a RISC processor, a Fibre protocol engine, and transceivers into a single, efficient FC controller chip that increases reliability and performance by lowering CPU utilization.
Broad OEM Acceptance
The QLA2310FL HBA is validated by every major OEM including Dell, EMC, HDS, HP, IBM, and Sun. The QLA2310’s extensive certification from major server and storage manufacturers makes it the perfect choice for multiplatform requirements.
Simplified Setup
Point-and-click installation and configuration wizards simply the HBA setup process. Storage administrators can quickly deploy HBAs across a SAN using standard HBA management tools and device utilities. The QLA2310FL is also fully compatible with industry standard application programming interfaces (APIs), including SNIA HBA API and SMI-S, thereby allowing administrators to manage QLogic HBAs using third-party software applications.
Proven Architecture
The QLA2310FL architecture is the result of more than 15 years of progressive development and testing. Proven architecture from QLogic delivers higher overall reliability and enables advanced functionality with its single-chip integration, placing QLogic years ahead of its competitors. The QLA2310FL also has proven interoperability with all major software applications, hardware platforms, and operating systems.
The Bottom Line
Driving the standard for interoperability with extensive FC testing in SAN environments, you can feel confident in choosing the QLogic solution.
Speed
64-bit, 66-MHz PCI-X
Single voltage
3.3 V and 5.0 V buses supported
Compliance
PCI Local Bus Specification rev. 2.2, PCI-X Addendum rev. 1.0a, PCI Hot Plug Specification 1.0, PCI Bus Power Management Interface Specification rev. 1.1
Fibre Channel Specifications
Speed
200 MBps maximum at half-duplex
400 MBps maximum at full-duplex
Topology
FC-AL, FC-AL-2, point to point, switched fabric (FL_Port and F_Port)
Buffer credits
For 512-byte frame size, 9 credits issued
For 2K-byte frame size, 3 credits issued
Class of service
Class 3 Fibre Channel service
Protocols
SCSI-FCP, IP, FC-TAPE
Compliance
Second Generation FC Generic Services Definition (FC-GS-2), Third Generation FC Generic Services Definition (FC-GS-3), Fibre Channel-Physical and Signaling Interface (FC-PH), SCSI-3 Fibre Channel Protocol (SCSI-FCP), Fibre Channel-Arbitrated Loop-2 (FC-AL-2), Fibre Channel-Private Loop Direct Attach Technical Report (FC-PLDA), RFC 2625 IP and APR Over Fibre Channel, Fibre Channel Framing and Signaling (FC-FS)
Tools and Utilities
Management tools
FC HBA Manager
Device utilities
Command line interface; configuration utilities resident with BIOS and FCode
Boot support
Intel x86: BIOS (32-bit), EFI (64-bit); Solaris SPARC: FCode
APIs
SNIA HBA API V2, SMI-S, and FDMI
Operating systems*
Windows Server 2003 (32-bit and 64-bit), Windows NT, Windows 2000, Solaris SPARC, Linux (32-bit and 64-bit), Novell NetWare, Mac OS X
64-bit, 66-MHz PCI-X
Single voltage
3.3 V and 5.0 V buses supported
Compliance
PCI Local Bus Specification rev. 2.2, PCI-X Addendum rev. 1.0a, PCI Hot Plug Specification 1.0, PCI Bus Power Management Interface Specification rev. 1.1
Fibre Channel Specifications
Speed
200 MBps maximum at half-duplex
400 MBps maximum at full-duplex
Topology
FC-AL, FC-AL-2, point to point, switched fabric (FL_Port and F_Port)
Buffer credits
For 512-byte frame size, 9 credits issued
For 2K-byte frame size, 3 credits issued
Class of service
Class 3 Fibre Channel service
Protocols
SCSI-FCP, IP, FC-TAPE
Compliance
Second Generation FC Generic Services Definition (FC-GS-2), Third Generation FC Generic Services Definition (FC-GS-3), Fibre Channel-Physical and Signaling Interface (FC-PH), SCSI-3 Fibre Channel Protocol (SCSI-FCP), Fibre Channel-Arbitrated Loop-2 (FC-AL-2), Fibre Channel-Private Loop Direct Attach Technical Report (FC-PLDA), RFC 2625 IP and APR Over Fibre Channel, Fibre Channel Framing and Signaling (FC-FS)
Tools and Utilities
Management tools
FC HBA Manager
Device utilities
Command line interface; configuration utilities resident with BIOS and FCode
Boot support
Intel x86: BIOS (32-bit), EFI (64-bit); Solaris SPARC: FCode
APIs
SNIA HBA API V2, SMI-S, and FDMI
Operating systems*
Windows Server 2003 (32-bit and 64-bit), Windows NT, Windows 2000, Solaris SPARC, Linux (32-bit and 64-bit), Novell NetWare, Mac OS X
$595.00
QLA 2310FL
© Copyright 2004–2012, Data Storage Systems, Inc.
Single Port, 2 Gbps, 64 bit, 133 Mhz PCI-X FC HBA
Physical Specifications
Ports
One
Media
Copper
Connections
HSSDC connector that supports copper cabling. Fibre optic support available using an external MIA
Form factor
Half size: 17.78 cm×10.67 cm (7.0"×4.2")
Bracket size
Standard size
Environment and Equipment Specifications
Airflow
0 lf/m
Temperature
Operating: 0°C/32°F to 55°C/131°F.
Storage: –20°C/–4°F to 40°C/158°F
Humidity
Relative (non-condensing): 10% to 90%
Storage: 5% to 95%
Power dissipation
~ 5.0 watts
Cable
Copper, 1-Gbps or 2-Gbps compliant, depending on application
Cable distances
1 Gbps: 33 meters
Gbps: 17 meters
Agency Approvals—Product Safety
US/Canada
UL, cUL, UL1950, UL60950 (QLA2310F), cUL C22.2 No.950
Europe
73/23/ECC Low Voltage Directive:
TUV: EN60950: 1992+A1,2,3,4,11
Agency Approvals—EMI and EMC
US
FCC Part 15, Class B
Europe
89/336/EEC EMC Directive CE Mark: EN55022: 1995 Class B, EN55024: 1998, EN61000-3-2:1995, EN61000-3-3:1994
Japan
VCCI, Class B
Ports
One
Media
Copper
Connections
HSSDC connector that supports copper cabling. Fibre optic support available using an external MIA
Form factor
Half size: 17.78 cm×10.67 cm (7.0"×4.2")
Bracket size
Standard size
Environment and Equipment Specifications
Airflow
0 lf/m
Temperature
Operating: 0°C/32°F to 55°C/131°F.
Storage: –20°C/–4°F to 40°C/158°F
Humidity
Relative (non-condensing): 10% to 90%
Storage: 5% to 95%
Power dissipation
~ 5.0 watts
Cable
Copper, 1-Gbps or 2-Gbps compliant, depending on application
Cable distances
1 Gbps: 33 meters
Gbps: 17 meters
Agency Approvals—Product Safety
US/Canada
UL, cUL, UL1950, UL60950 (QLA2310F), cUL C22.2 No.950
Europe
73/23/ECC Low Voltage Directive:
TUV: EN60950: 1992+A1,2,3,4,11
Agency Approvals—EMI and EMC
US
FCC Part 15, Class B
Europe
89/336/EEC EMC Directive CE Mark: EN55022: 1995 Class B, EN55024: 1998, EN61000-3-2:1995, EN61000-3-3:1994
Japan
VCCI, Class B
Data Protection,
Storage Networking Systems.
Storage Networking Systems.