|
|
Data Storage Systems, Inc. offers the full line of QLogic fibre channel
solutions including the QLogic QCP2340 FC Host Bus Adatper (HBA) . Along
with all the QLogic fibre channel products, DSS, Inc. offers
implementation/integration services if needed. For further information and
assistance, please call our sales department at (800) 519-4737.
Designed as the optimum choice for Sun Microsystems®‚ Sun Fire™ servers, the SANblade QCP2340 offer customers nondisruptive expansion of their storage area network (SAN) with full support of cPCI hot swap functionality. Delivering industrial strength performance, these 2-Gbps Fibre Channel to 64-bit, 66-MHz CompactPCI (cPCI) HBAs incorporate a robust mechanical design with high compute density. These multimode optic HBAs are specifically designed for physically demanding environments that require serviceability and availability.
Designed as the optimum choice for Sun Microsystems®‚ Sun Fire™ servers, the SANblade QCP2340 offer customers nondisruptive expansion of their storage area network (SAN) with full support of cPCI hot swap functionality. Delivering industrial strength performance, these 2-Gbps Fibre Channel to 64-bit, 66-MHz CompactPCI (cPCI) HBAs incorporate a robust mechanical design with high compute density. These multimode optic HBAs are specifically designed for physically demanding environments that require serviceability and availability.
QCP2340-CK
Ships in an individually packed box with a standard
size bracket, a spare low-profile bracket, SANsurfer
FC HBAs CD, and Quick Start Guide.
Ease of Use
Auto-negotiation of Fibre Channel speed bit rate (1 Gbps or 2 Gbps)
Easy detection of activities through an LED panel:
Power
Online
Signal acquired
Loss of synchronization
Firmware error
Automatic topology detection
Quick start guide
Persistent binding
Superior Scalability
Concurrent support for SCSI and IP protocols
Load balancing for optimized performance
Simultaneous initiator and target mode support
Local and remote management
Enhanced Reliability
Unique, single-integrated Fibre Channel controller for added reliability and optimum performanceocal and remote management
Auto-negotiation of Fibre Channel speed bit rate (1 Gbps or 2 Gbps)
Easy detection of activities through an LED panel:
Power
Online
Signal acquired
Loss of synchronization
Firmware error
Automatic topology detection
Quick start guide
Persistent binding
Superior Scalability
Concurrent support for SCSI and IP protocols
Load balancing for optimized performance
Simultaneous initiator and target mode support
Local and remote management
Enhanced Reliability
Unique, single-integrated Fibre Channel controller for added reliability and optimum performanceocal and remote management
Cost Effective
The QCP2340 is the right solution for mid-range and enterprise-level server manufacturers implementing cPCI in mission critical environments requiring single port, 2-Gbps cPCI.
Leading Single Chip Integration
The QCP2340 uniquely integrates a RISC processor, a Fibre protocol engine, and transceivers into a single, efficient FC controller chip that increases reliability and performance by lowering CPU utilization.
Broad OEM Acceptance
The QCP2340 HBA is validated by every major OEM including Dell, EMC, HDS, HP, IBM, and Sun. The QCP2340’s extensive certification from major server and storage manufacturers makes it the perfect choice for multiplatform requirements.
Simplified Setup
Point-and-click installation and configuration wizards simply the HBA setup process. Storage administrators can quickly deploy HBAs across a SAN using standard HBA management tools and device utilities. The QCP2340 is also fully compatible with industry standard application programming interfaces (APIs), including SNIA HBA API and SMI-S, thereby allowing administrators to manage QLogic HBAs using third-party software applications.
Proven Architecture
The QCP2340 architecture is the result of more than 15 years of progressive development and testing. Proven architecture from QLogic delivers higher overall reliability and enables advanced functionality with its single-chip integration, placing QLogic years ahead of its competitors. The QCP2340 also has proven interoperability with all major software applications, hardware platforms, and operating systems.
The Bottom Line
Driving the standard for interoperability with extensive FC testing in SAN environments, you can feel confident in choosing the QLogic solution.
The QCP2340 is the right solution for mid-range and enterprise-level server manufacturers implementing cPCI in mission critical environments requiring single port, 2-Gbps cPCI.
Leading Single Chip Integration
The QCP2340 uniquely integrates a RISC processor, a Fibre protocol engine, and transceivers into a single, efficient FC controller chip that increases reliability and performance by lowering CPU utilization.
Broad OEM Acceptance
The QCP2340 HBA is validated by every major OEM including Dell, EMC, HDS, HP, IBM, and Sun. The QCP2340’s extensive certification from major server and storage manufacturers makes it the perfect choice for multiplatform requirements.
Simplified Setup
Point-and-click installation and configuration wizards simply the HBA setup process. Storage administrators can quickly deploy HBAs across a SAN using standard HBA management tools and device utilities. The QCP2340 is also fully compatible with industry standard application programming interfaces (APIs), including SNIA HBA API and SMI-S, thereby allowing administrators to manage QLogic HBAs using third-party software applications.
Proven Architecture
The QCP2340 architecture is the result of more than 15 years of progressive development and testing. Proven architecture from QLogic delivers higher overall reliability and enables advanced functionality with its single-chip integration, placing QLogic years ahead of its competitors. The QCP2340 also has proven interoperability with all major software applications, hardware platforms, and operating systems.
The Bottom Line
Driving the standard for interoperability with extensive FC testing in SAN environments, you can feel confident in choosing the QLogic solution.
Speed
64-bit, 66-MHz PCI-X
Single voltage
3.3 V and 5.0 V buses supported
Compliance
PICMG 2.0 CompactPCI Specification rev. 3.0, PICMG 2.1 Compact PCI (cPCI) Hot Swap Specification rev. 1.0, PCI Bus Power Management Interface Specification rev. 1.1
Fibre Channel Specifications
Speed
200 MBps maximum at half-duplex
400 MBps maximum at full-duplex
Topology
FC-AL, FC-AL-2, point to point, switched fabric (FL_Port and F_Port)
Buffer credits
For 512-byte frame size, 9 credits issued
For 2K-byte frame size, 3 credits issued
Class of service
Class 3 Fibre Channel service
Protocols
SCSI-FCP, IP, FC-TAPE
Compliance
Second Generation FC Generic Services Definition (FC-GS-2), Third Generation FC Generic Services Definition (FC-GS-3), Fibre Channel-Physical and Signaling Interface (FC-PH), SCSI-3 Fibre Channel Protocol (SCSI-FCP), Fibre Channel-Arbitrated Loop-2 (FC-AL-2), Fibre Channel-Private Loop Direct Attach Technical Report (FC-PLDA), RFC 2625 IP and APR Over Fibre Channel, Fibre Channel Framing and Signaling (FC-FS)
Tools and Utilities
Management tools
FC HBA Manager
Device utilities
Command line interface; configuration utilities resident with BIOS and FCode
Boot support
Solaris SPARC: FCode
APIs
SNIA HBA API V2, SMI-S, and FDMI
Operating systems*
Solaris SPARC
64-bit, 66-MHz PCI-X
Single voltage
3.3 V and 5.0 V buses supported
Compliance
PICMG 2.0 CompactPCI Specification rev. 3.0, PICMG 2.1 Compact PCI (cPCI) Hot Swap Specification rev. 1.0, PCI Bus Power Management Interface Specification rev. 1.1
Fibre Channel Specifications
Speed
200 MBps maximum at half-duplex
400 MBps maximum at full-duplex
Topology
FC-AL, FC-AL-2, point to point, switched fabric (FL_Port and F_Port)
Buffer credits
For 512-byte frame size, 9 credits issued
For 2K-byte frame size, 3 credits issued
Class of service
Class 3 Fibre Channel service
Protocols
SCSI-FCP, IP, FC-TAPE
Compliance
Second Generation FC Generic Services Definition (FC-GS-2), Third Generation FC Generic Services Definition (FC-GS-3), Fibre Channel-Physical and Signaling Interface (FC-PH), SCSI-3 Fibre Channel Protocol (SCSI-FCP), Fibre Channel-Arbitrated Loop-2 (FC-AL-2), Fibre Channel-Private Loop Direct Attach Technical Report (FC-PLDA), RFC 2625 IP and APR Over Fibre Channel, Fibre Channel Framing and Signaling (FC-FS)
Tools and Utilities
Management tools
FC HBA Manager
Device utilities
Command line interface; configuration utilities resident with BIOS and FCode
Boot support
Solaris SPARC: FCode
APIs
SNIA HBA API V2, SMI-S, and FDMI
Operating systems*
Solaris SPARC
$1,105.00
QCP 2340
© Copyright 2004–2012, Data Storage Systems, Inc.
Single Port, 2 Gbps, 64 bit, 66 Mhz,
SANBlade cPCI FC HBA
Physical Specifications
Ports
One
Media
Multimode Optic
Optics
Short wave laser
Connections
LC-style connector that supports non-OFC, multimode fibre optic cabling using a 2 × 5 fibre optic transceiver module.
Form factor
CompactPCI: 16.0cm × 10.0cm (6.3" × 3.9")
Bracket size
Standard size
Environment and Equipment Specifications
Airflow
0 lf/m
Temperature
Operating: 0°C/32°F to 55°C/131°F.
Storage: –20°C/–4°F to 70°C/158°F
Humidity
Relative (noncondensing): 10% to 90%
Storage: 5% to 95%
Power dissipation
~ 5.0 watts
Cable
50/125µm multimode fiber, 62.5/125 µm multimode fiber
Cable distances
1 Gbps: 500 meters 50/125 µm fiber, 300 meters 62.5/125 µm fiber
2 Gbps: 300 meters 50/125 µm fiber, 150 meters 62.5/125 µm fiber
Agency Approvals—Product Safety
US/Canada
UL, cUL, UL60950, cUL C22.2 No.60950, Class 1 Laser Product per DHHS 21CFR J
Europe
73/23/ECC Low Voltage Directive:
TUV: EN60950: 2000, EN60825-1/A11: 1996, EN60825-1: 1994 +A11
Agency Approvals—EMI and EMC
US
FCC Part 15, Class A
Canada
Industry Canada ICES-003, Class A
Europe
89/336/EEC EMC Directive CE Mark: EN55022: 1995 Class A, EN55024: 1998, EN61000-3-2:1995, EN61000-3-3:1994
Japan
VCCI, Class A
Taiwan
CNS 13438 Class A BSMI
New Zealand/Australia
AS/NZS 3548 Class A C-tick
Ports
One
Media
Multimode Optic
Optics
Short wave laser
Connections
LC-style connector that supports non-OFC, multimode fibre optic cabling using a 2 × 5 fibre optic transceiver module.
Form factor
CompactPCI: 16.0cm × 10.0cm (6.3" × 3.9")
Bracket size
Standard size
Environment and Equipment Specifications
Airflow
0 lf/m
Temperature
Operating: 0°C/32°F to 55°C/131°F.
Storage: –20°C/–4°F to 70°C/158°F
Humidity
Relative (noncondensing): 10% to 90%
Storage: 5% to 95%
Power dissipation
~ 5.0 watts
Cable
50/125µm multimode fiber, 62.5/125 µm multimode fiber
Cable distances
1 Gbps: 500 meters 50/125 µm fiber, 300 meters 62.5/125 µm fiber
2 Gbps: 300 meters 50/125 µm fiber, 150 meters 62.5/125 µm fiber
Agency Approvals—Product Safety
US/Canada
UL, cUL, UL60950, cUL C22.2 No.60950, Class 1 Laser Product per DHHS 21CFR J
Europe
73/23/ECC Low Voltage Directive:
TUV: EN60950: 2000, EN60825-1/A11: 1996, EN60825-1: 1994 +A11
Agency Approvals—EMI and EMC
US
FCC Part 15, Class A
Canada
Industry Canada ICES-003, Class A
Europe
89/336/EEC EMC Directive CE Mark: EN55022: 1995 Class A, EN55024: 1998, EN61000-3-2:1995, EN61000-3-3:1994
Japan
VCCI, Class A
Taiwan
CNS 13438 Class A BSMI
New Zealand/Australia
AS/NZS 3548 Class A C-tick
Data Protection,
Storage Networking Systems.
Storage Networking Systems.