|
|
Data Storage Systems, Inc. offers the full line of QLogic fibre channel solutions
including the QLogic SANbox 5802 Stackable Fibre Channel Switch. Along with all the
QLogic fibre channel products, DSS, Inc. offers implementation/integration services if
needed. For further information and assistance,tyou can reach DSS, Inc. Sales by
phone at: (763) 416-0474, e-Mail: sales@datastoragesys.com, Skype: DSS.Sales or
just click on our "Live Help" button located near the top right hand corner of this page.
Thanks to widespread corporate plans for server virtualization/consolidation, along with the rapid adoption of multi-core processors, many SAN users are already feeling the need for 8Gb network speeds. At a minimum, savvy IT managers know they must take the 8Gb transition into account when making their next equipment purchases. However, these same customers and others who are not yet ready for 8Gb also demand a solution that can be installed alongside existing infrastructure without requiring large up front payments for capabilities that may be needed later.
Thanks to widespread corporate plans for server virtualization/consolidation, along with the rapid adoption of multi-core processors, many SAN users are already feeling the need for 8Gb network speeds. At a minimum, savvy IT managers know they must take the 8Gb transition into account when making their next equipment purchases. However, these same customers and others who are not yet ready for 8Gb also demand a solution that can be installed alongside existing infrastructure without requiring large up front payments for capabilities that may be needed later.
SB5800V-08A
QLogic 5802V Fibre Channel Switch
Highlights:
Highlights:
QLogic SANbox 5800V full fabric switch with (8) 8Gb ports
enabled, plus (4) 10Gb stacking ports enabled, (2) power
supplies. SB-5800V-08A
QLogic field-proven modular backbone architecture, a key component of the QLogic SAN lifecycle management framework offers a
powerful answer to this dual request, allowing customers to build SANs that will last far into the future. Meanwhile simultaneously
lowering both capital expense (CAPEX) and operating expense (OPEX) through all phases of the technology roll out.
SANbox 5802V lets you connect 8Gb, 4Gb or 2Gb devices to a SAN for about the same cost as competing 4Gb-only solutions – but the investment protection advantages goes much deeper than that! Unlike other solutions, the 5802V offers the ability to phase bandwidth provisioning incrementally within your ISL fabric the most performance-critical area of the SAN.
1. Start with “Always On” 10Gb ISLs
Each SANbox 5802V ships with all four 10Gb stacking ports active by default. This unique cost-saving feature means basic interswitch connectivity is now included with the product! Customers no longer need to take ISL port costs into account when planning and purchasing their SANs – every port they purchase may now be connected directly to a server or storage device (See sidebar for more on stacking). 10Gb ISL speed provides more than enough bandwidth for customers in the early stages of their 8Gb migration, when the majority of switch ports will still be attached to 4Gb storage and other legacy devices.
2. 20Gb Bandwidth On-Demand
When enough device ports are connected to 8Gb devices to require additional bandwidth, customers may non-disruptively upgrade the ISL ports on one or more switches to 20Gb – the World’s Fastest Fibre Channel. 20Gb, the only ISL technology that perfectly complements 8Gb device speeds, extends the stability, cost-savings and performance benefits of a true backbone architecture to next generation SANs.
IT managers now have all the network headroom they need to deploy new applications and technologies with confidence. Since 20Gb uses the same cables/connectors as 10Gb, customers can upgrade their entire SAN at the click of a mouse – without unplugging a single cable or purchasing any new hardware.
Easy to Install and Manage
Installation and configuration wizards – From basic switch setup to advanced zoning and extended distance configuration,
the SANbox 5802V has automated routines to make deployment a snap. Installation is a 3-step point-and-click process. Selfconfiguring switch ports automatically adjust to 8Gb, 4Gb, or 2Gb device speeds.
On-board Graphical User Interface (GUI) – There is no software to load. Just point a web browser at any switch and
manage the entire fabric from that location. No matter what your level of expertise, the web-based QuickTools interface
has everything you need for basic fabric management. and fpradvanced administration of larger SANs, the optional Enterprise
Fabric Suite application provides an unprecedented level of intuitive granular control.
Stack management – With Enterprise Fabric Suite, users can manage stacks of 5000 series products as a single device, loading firmware, applying security configuration changes, or handling user and Simple Network Management Protocol (SNMP)
administration for up to six switches simultaneously.
SANbox 5802V lets you connect 8Gb, 4Gb or 2Gb devices to a SAN for about the same cost as competing 4Gb-only solutions – but the investment protection advantages goes much deeper than that! Unlike other solutions, the 5802V offers the ability to phase bandwidth provisioning incrementally within your ISL fabric the most performance-critical area of the SAN.
1. Start with “Always On” 10Gb ISLs
Each SANbox 5802V ships with all four 10Gb stacking ports active by default. This unique cost-saving feature means basic interswitch connectivity is now included with the product! Customers no longer need to take ISL port costs into account when planning and purchasing their SANs – every port they purchase may now be connected directly to a server or storage device (See sidebar for more on stacking). 10Gb ISL speed provides more than enough bandwidth for customers in the early stages of their 8Gb migration, when the majority of switch ports will still be attached to 4Gb storage and other legacy devices.
2. 20Gb Bandwidth On-Demand
When enough device ports are connected to 8Gb devices to require additional bandwidth, customers may non-disruptively upgrade the ISL ports on one or more switches to 20Gb – the World’s Fastest Fibre Channel. 20Gb, the only ISL technology that perfectly complements 8Gb device speeds, extends the stability, cost-savings and performance benefits of a true backbone architecture to next generation SANs.
IT managers now have all the network headroom they need to deploy new applications and technologies with confidence. Since 20Gb uses the same cables/connectors as 10Gb, customers can upgrade their entire SAN at the click of a mouse – without unplugging a single cable or purchasing any new hardware.
Easy to Install and Manage
Installation and configuration wizards – From basic switch setup to advanced zoning and extended distance configuration,
the SANbox 5802V has automated routines to make deployment a snap. Installation is a 3-step point-and-click process. Selfconfiguring switch ports automatically adjust to 8Gb, 4Gb, or 2Gb device speeds.
On-board Graphical User Interface (GUI) – There is no software to load. Just point a web browser at any switch and
manage the entire fabric from that location. No matter what your level of expertise, the web-based QuickTools interface
has everything you need for basic fabric management. and fpradvanced administration of larger SANs, the optional Enterprise
Fabric Suite application provides an unprecedented level of intuitive granular control.
Stack management – With Enterprise Fabric Suite, users can manage stacks of 5000 series products as a single device, loading firmware, applying security configuration changes, or handling user and Simple Network Management Protocol (SNMP)
administration for up to six switches simultaneously.
8Gb / “8Gb-ready” performance at affordable prices: Backwards compatible with 4Gb and 2Gb devices
and optics – deploy as an 8Gb or a 4Gb switch.
Scalability
Ports per chassis
Eight to twenty 8-Gbps ports (upgradeable in 4-port increments)
Four 10/20-Gbps XPAK MSA-compliant ports (10-Gbps default; upgradable to 20-Gbps)
Multi-switch fabric support
All topologies including: stack, cascade, cascaded loop, and mesh
Multiple 10/20Gb or 8Gb links between switches
Adaptive trunking, intelligent path selection
Port types
All ports are universal, auto-discovering, selfconfiguring, and assume the following states: F_Port, FL_port, E_port, G_Port, GL_Port
Performance Features
Fabric Port Speed
2/4/8-Gbps, 10/20-Gbps full-duplex.All ports auto-negotiate with slower devices or ports.
Fabric latency less than 0.2 µs
Cut-through routing
Fabric Point-to-Point Bandwidth
1700 MBps full-duplex on 8-Gbps ports
5100 MBps full-duplex on 20-Gbps ports
Aggregate Bandwidth
544-Gbps per chassis, end-to-end
Non-blocking architecture
Maximum Frame Sizes
2148 bytes (2112 byte payload)
Per-port Buffering
ASIC-embedded mem
ory (non-shared)
Guaranteed 16 credit zero wait state buffer for full performance
up to 13km @ 2-Gbps and 2km @ 10-Gbps
Extended distance via credit donation
Media
Hot-pluggable, industry-standard 3.3 volt SFP + transceivers for 8-Gbps ports
Hot-pluggable, industry-standard XPAK optics or copper stacking cables for 10/20-Gbps ports
Compatible with 4-Gbps and 2-Gbps SFPs
Supported SFP types
Shortwave/longwave (optical), active copper
Maximum Media transmission ranges
Device ports (@ 2-Gbps)
Shortwave optical: 500 m (1,640 ft.)
Longwave optical: 10 km (6.2 mi.)
•Stacking ports (@ 10-Gbps)
Shortwave optical: 300 m (984 ft.)
Longwave optical: 2 km (1.2 mi.)
Cable types
50/62.5 micron multimode fiber optic
9 micron single-mode fiber optic
Interoperability
Compatible with FC-SW-2 compliant switches including Brocade®, Cisco®, and McData®
Management interoperability with leading SAN management applications
Ports per chassis
Eight to twenty 8-Gbps ports (upgradeable in 4-port increments)
Four 10/20-Gbps XPAK MSA-compliant ports (10-Gbps default; upgradable to 20-Gbps)
Multi-switch fabric support
All topologies including: stack, cascade, cascaded loop, and mesh
Multiple 10/20Gb or 8Gb links between switches
Adaptive trunking, intelligent path selection
Port types
All ports are universal, auto-discovering, selfconfiguring, and assume the following states: F_Port, FL_port, E_port, G_Port, GL_Port
Performance Features
Fabric Port Speed
2/4/8-Gbps, 10/20-Gbps full-duplex.All ports auto-negotiate with slower devices or ports.
Fabric latency less than 0.2 µs
Cut-through routing
Fabric Point-to-Point Bandwidth
1700 MBps full-duplex on 8-Gbps ports
5100 MBps full-duplex on 20-Gbps ports
Aggregate Bandwidth
544-Gbps per chassis, end-to-end
Non-blocking architecture
Maximum Frame Sizes
2148 bytes (2112 byte payload)
Per-port Buffering
ASIC-embedded mem
ory (non-shared)
Guaranteed 16 credit zero wait state buffer for full performance
up to 13km @ 2-Gbps and 2km @ 10-Gbps
Extended distance via credit donation
Media
Hot-pluggable, industry-standard 3.3 volt SFP + transceivers for 8-Gbps ports
Hot-pluggable, industry-standard XPAK optics or copper stacking cables for 10/20-Gbps ports
Compatible with 4-Gbps and 2-Gbps SFPs
Supported SFP types
Shortwave/longwave (optical), active copper
Maximum Media transmission ranges
Device ports (@ 2-Gbps)
Shortwave optical: 500 m (1,640 ft.)
Longwave optical: 10 km (6.2 mi.)
•Stacking ports (@ 10-Gbps)
Shortwave optical: 300 m (984 ft.)
Longwave optical: 2 km (1.2 mi.)
Cable types
50/62.5 micron multimode fiber optic
9 micron single-mode fiber optic
Interoperability
Compatible with FC-SW-2 compliant switches including Brocade®, Cisco®, and McData®
Management interoperability with leading SAN management applications
© Copyright 2004–2012, Data Storage Systems, Inc.
QLogic 5800 and 5802
SB5800V-08A8
QLogic SANbox 5802V full fabric switch with (8) 8Gb ports
enabled, plus (4) 10Gb stacking ports enabled, (2) power
supplies.Includes 8, SFP's SB-5802V-08A8*
SB5802V-08A
SB5802V-08A8
SB5802V-20A8
QLogic SANbox 5802V full fabric switch with (8) 8Gb ports
enabled, plus (4) 10Gb stacking ports enabled, (2) power
supplies. SB-5802V-08A
QLogic SANbox 5800V full fabric switch with (8) 8Gb ports
enabled, plus (4) 10Gb stacking ports enabled, (2) power
supplies.Includes 8, SFP's SB-5800V-08A*
$2,330.00
$2,810.00
$4,498.00
$5,040.00
$8,406.00
QLogic SANbox 5802V full fabric switch with (20) 8Gb ports
enabled, plus (4) 10Gb stacking ports enabled, (2) power
supplies.Includes 8, SFP's SB-5802V-208A*
LK-5800V-4PORT
LK-5800V-4PORT8
LK-5802V-4PORT
LK-5802V-4PORT8
LK-5800-20G
LK-5802-20G
LK-5600-4PORT
EFS2007
LK-FABSECUR
LK-SANDR
SB-RACKKIT
SB-PS8-FB
SB-PSFANFB
XPAK-COPP-03
XPAK-COPP-09
XPAK-COPP-78
XPAK-SW-01
SFP4-SW-JD5
SFP4-SW-JD4
SFP8-SW-4PK
SFP8-SW-1PK
SFP2-LW-01
LK-5800V-4PORT8
LK-5802V-4PORT
LK-5802V-4PORT8
LK-5800-20G
LK-5802-20G
LK-5600-4PORT
EFS2007
LK-FABSECUR
LK-SANDR
SB-RACKKIT
SB-PS8-FB
SB-PSFANFB
XPAK-COPP-03
XPAK-COPP-09
XPAK-COPP-78
XPAK-SW-01
SFP4-SW-JD5
SFP4-SW-JD4
SFP8-SW-4PK
SFP8-SW-1PK
SFP2-LW-01
Four-port expansion license key for QLogic 5800V single-power supply switch, no SFPs.
Four-port expansion license key for QLogic 5800V single-power supply switch, includes four 8Gb SFPs.
Four-port expansion license key for QLogic 5802V dual-power-supply switch, no SFPs.
Four-port expansion license key for QLogic 5802V dual-power-supply switch, includes four 8Gb SFPs.
20Gb stacking port speed upgrade for QLogic 5800V single-power-supply switch.
20Gb stacking port speed upgrade for QLogic 5800V dual-power-supply switch.
Four-port upgrade software license key for QLogic 5000 Series Switches.
Enterprise Fabric Suite 2007 software application, unlimited switch license.
Software license key for Fabric Security License, sold on a per switch basis.
Software license key for SANdoctor Diagnostics, sold on a per switch basis.
Rack mount kit for QLogic 5000 Series Switch models (SAE mounting screws).
Field replaceable power supply module for SB5802V Switch models. Includes one US power cord.
Field replaceable power supply module for SB5202 and SB5602 Switch models. Includes one US power cord.
10Gb 3" (76mm) copper stacking cable with integrated XPAK connectors.
10Gb 9" (228mm) copper stacking cable with integrated XPAK connectors.
10Gb 78" (2m) copper stacking cable with integrated XPAK connectors.
10Gb (quantity 1) short-wave, 850nm XPAK optic with LC connectors.
4Gb (5-pack) short-wave, 850nm SFP optics with LC connectors.
4Gb (4-pack) short-wave, 850nm SFP optics with LC connectors.
8Gb (4-pack) short-wave, 850nm SFP+ optics with LC connectors.
8Gb (quantity 1) short-wave, 850nm SFP+ optics with LC connectors.
2Gb (quantity 1) long-wave, 1310nm SFP optic with LC connector.
Four-port expansion license key for QLogic 5800V single-power supply switch, includes four 8Gb SFPs.
Four-port expansion license key for QLogic 5802V dual-power-supply switch, no SFPs.
Four-port expansion license key for QLogic 5802V dual-power-supply switch, includes four 8Gb SFPs.
20Gb stacking port speed upgrade for QLogic 5800V single-power-supply switch.
20Gb stacking port speed upgrade for QLogic 5800V dual-power-supply switch.
Four-port upgrade software license key for QLogic 5000 Series Switches.
Enterprise Fabric Suite 2007 software application, unlimited switch license.
Software license key for Fabric Security License, sold on a per switch basis.
Software license key for SANdoctor Diagnostics, sold on a per switch basis.
Rack mount kit for QLogic 5000 Series Switch models (SAE mounting screws).
Field replaceable power supply module for SB5802V Switch models. Includes one US power cord.
Field replaceable power supply module for SB5202 and SB5602 Switch models. Includes one US power cord.
10Gb 3" (76mm) copper stacking cable with integrated XPAK connectors.
10Gb 9" (228mm) copper stacking cable with integrated XPAK connectors.
10Gb 78" (2m) copper stacking cable with integrated XPAK connectors.
10Gb (quantity 1) short-wave, 850nm XPAK optic with LC connectors.
4Gb (5-pack) short-wave, 850nm SFP optics with LC connectors.
4Gb (4-pack) short-wave, 850nm SFP optics with LC connectors.
8Gb (4-pack) short-wave, 850nm SFP+ optics with LC connectors.
8Gb (quantity 1) short-wave, 850nm SFP+ optics with LC connectors.
2Gb (quantity 1) long-wave, 1310nm SFP optic with LC connector.
Fabric Managements
Management methods
QuickTools web applet
Enterprise Fabric Suite 2007
Command Line Interface
API, GS-4 Management Server (including FDMI), SNMP, RADIUS, FTP, TFTP, SMI-S.
Access methods
10/100 Ethernet BaseT (RJ45), serial port (RS-232 with DB9), in-band (Fibre Channel)
Diagnostics
Power-On Self Test (POST)
Optional SANdoctor fabric diagnostics software
Fabric servicess
Simple name server, hardware based zoning, Registered State Change Notification (RSCN), I/O StreamGuard, multi-chassis in-order delivery, automatic path selection, FDMI support, IPv6 support
User interface
LEDs, command-line console, and web utilities
Mechanical/Power/Cooling
Dual, hot-swap power supplies, integrated fans
Optional rail mount kit
Front-to-back air pattern
RoHS compliant
Dimensions
H x W x D: 43.2 x 432 x 305 mm (1.7 x 17 x 12 in) – single power supply
Weight
8.16 kg (18 lbs) – dual power supply
Environmental and Equipment Specifications
Operating
Temperature: 5° to 40°C (41° to 104°F)
Humidity: 10% to 90% non-condensing
Altitude: 0 to 10,000 feet
Vibration: 5-500 Hz, 0.27g, 5 sweeps
Shock: 3.5g, 3ms, half sine, 20 repetitions
Non-Operating
Temperature: -20° to 70°C (-4 to 158 °F)
Humidity: 10% to 95% non-condensing
Altitude: 0 to 50,000 feet
Vibration: 2 to 200 Hz, 0.5g, 5 sweeps
Shock: 50g, 4216 mmps, 13msec, 3 axis
Electrical
Voltage: 100 to 240 VAC; 50 to 60Hz
Power load: 1 A at 120 VAC; 0.5 A at 240 VAC
Heat output: 120W maximum
Agency Approvals
Safety Standards
US/Canada: UL/cUL, 60950-1
Europe: EN60950, CB Scheme-IEC 60950-1, CE, TUV, Low Voltage Directive
Russia: GOST R
Agency Approvals—EMI/EMC
Meets Class A emissions and immunity requirements for USA, Canada, Europe, Australia, New Zealand, Korea, Japan
* Subject to availability of OS and hardware from respective OEMs
Management methods
QuickTools web applet
Enterprise Fabric Suite 2007
Command Line Interface
API, GS-4 Management Server (including FDMI), SNMP, RADIUS, FTP, TFTP, SMI-S.
Access methods
10/100 Ethernet BaseT (RJ45), serial port (RS-232 with DB9), in-band (Fibre Channel)
Diagnostics
Power-On Self Test (POST)
Optional SANdoctor fabric diagnostics software
Fabric servicess
Simple name server, hardware based zoning, Registered State Change Notification (RSCN), I/O StreamGuard, multi-chassis in-order delivery, automatic path selection, FDMI support, IPv6 support
User interface
LEDs, command-line console, and web utilities
Mechanical/Power/Cooling
Dual, hot-swap power supplies, integrated fans
Optional rail mount kit
Front-to-back air pattern
RoHS compliant
Dimensions
H x W x D: 43.2 x 432 x 305 mm (1.7 x 17 x 12 in) – single power supply
Weight
8.16 kg (18 lbs) – dual power supply
Environmental and Equipment Specifications
Operating
Temperature: 5° to 40°C (41° to 104°F)
Humidity: 10% to 90% non-condensing
Altitude: 0 to 10,000 feet
Vibration: 5-500 Hz, 0.27g, 5 sweeps
Shock: 3.5g, 3ms, half sine, 20 repetitions
Non-Operating
Temperature: -20° to 70°C (-4 to 158 °F)
Humidity: 10% to 95% non-condensing
Altitude: 0 to 50,000 feet
Vibration: 2 to 200 Hz, 0.5g, 5 sweeps
Shock: 50g, 4216 mmps, 13msec, 3 axis
Electrical
Voltage: 100 to 240 VAC; 50 to 60Hz
Power load: 1 A at 120 VAC; 0.5 A at 240 VAC
Heat output: 120W maximum
Agency Approvals
Safety Standards
US/Canada: UL/cUL, 60950-1
Europe: EN60950, CB Scheme-IEC 60950-1, CE, TUV, Low Voltage Directive
Russia: GOST R
Agency Approvals—EMI/EMC
Meets Class A emissions and immunity requirements for USA, Canada, Europe, Australia, New Zealand, Korea, Japan
* Subject to availability of OS and hardware from respective OEMs
“Always on” 10Gb stacking ports: Why waste device ports and expensive SFPs creating ISL trunks?
High-speed switch-to-switch connectivity is included with the 5802V!
20Gb ISL bandwidth option: World’s Fastest Fibre Channel helps you prepare for the future without paying
more today. Same cables/connectors as 10Gb!
Higher port density: Four more ports per switch: 24 ports total. (20 device ports, plus four ultra-high-speed
stacking ports)
Preferred Service: included 24 x 7 call support, plus next-business-day hardware exchange
Virtual fabric-ready: Dynamically provision SAN resources for greater scalability, security, reliability, and
cost-savings. (All QLogic 8Gb products support the coming vFabric™ software release.)
SANbox 5800v, 5802V Add-Ons
Data Protection,
Storage Networking Systems.
Storage Networking Systems.